（浙江省計量科學研究院，浙江 杭州 310018）
摘 要：針對原有光纖參數測量設備獨立測試、測量效率低、光纖接口多次插拔等缺點，設計開發光纖多參數自動校準測試平臺。采用LabVIEW編程平臺，將多臺光纖參數測量設備互聯，集中控制，自動設置測量參數，引入4×4光開關矩陣，自動切換光路，避免光接口的多次插拔，以光功率計、光源的校準為例，編寫自動校準程序，自動記錄校準結果，自動生成校準報告。實際使用結果表明：該平臺校準測試效率高,功能拓展便捷，具有一定的應用前景和推廣價值。
關鍵詞：虛擬儀器；自動校準測試平臺；光纖參數；ActiveX
文獻標志碼：A 文章編號：1674-5124（2015）12-0074-05
Automatic platform for calibrating and testing multi-parameter of optical fiber
communication based on virtual instrument technology
CHEN Ting， ZHOU Wenqing， MAO Zhenhua
（Zhejiang Institute of Metrology，Hangzhou 310018，China）
Abstract: A new automatic platform for calibrating and testing multi-parameter of optical fiber communication was designed and developped to overcome the disadvantages in old testing way， such as independent testing with devices， low measurement efficiency， many times of plugging optical interface. Devices were interconnected and controlled， and the testing parameters were set automatically in this platform which was programmed by LabVIEW， 4×4 optical switch matrix was used to switch the light path automatically， avoiding multiple plugging optical interface. The optical power meter、light source can be calibrated automatically， the calibration result can be record and the report can be generated automatically in this platform. Application of this platform proved that the system has high efficiency， functional expansion is convenient， has a certain application prospect and promotional value.
Keywords: virtual instrument； auto calibration and test platform； optical fiber parameter； ActiveX
